If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

Gain (min.) ___________________________________dB ______________________________________

Gain flatness ± ___________ ± dB over ___________ MHz ______________________________________

Isolation (out-in) min. __________________________ dB ______________________________________

Power output, 1 dB compression, ________________dBm _______________________________________

Noise Figure, Typical__________________________dB _________________________________________

Supply Voltage _________________________volts DC ____________________________________________

Current, max. _______________________________mA ____________________________________________

Intercept point 2-tone, 3rd order __________ dBm typ

2-tone, ___order __________ dBm typ

Input_________Output_________

Max RF input without damage, with load __________dBm,

no load ______________________dBm.

Operating Temperature: ______________ ° C

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

Control Current _____________________________ mA max. _________________________________________

Insertion loss, @mA ____________ , _____________ dB max. _________________________________________

@mA ________ , ________ dB, _______ ± dB _______________________________________

@mA ________ , ________ dB, _______ ± dB _______________________________________

@mA ________ , ________ dB, _______ ± dB _______________________________________

VSWR or return loss (dB)

Input _________________ Output ____________

___ 50 ohms ___ 75 ohms ________________Other

Bi-phase (+ to -) conrol current, _______________________mA

D amp __________ D phase, 180° +/- ________degrees

Switching time * ____________________________ m sec max.

Rise time __________________________________ m sec max.

Max. RF input power ______________________ dBm, Operating Temperature ____________________ ° C

* 50% control to 90% RF (on) to 10% RF (off)

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

Primary Attenuation Steps_______________________dB ______________________________________

Step Accuracy (Primary) ______________________ ± dB ______________________________________

Thru Loss ___________________________________ dB ______________________________________

Input_________Output_________

Supply Voltage _________________________________ V

Supply Current ________________________________mA

LOGIC: __ TTL __ CMOS __________________ Other

Rise time / Fall time: ___________________________ m sec

Delay time (50% TTL to 90% RF) _________________ m sec

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

Coupling avg. _____________db, Tol. ± ___________dB ______________________________________

Coupling flatness max. ± ________________________dB ______________________________________

Mainline insertion loss max._______________________dB ______________________________________

Directivity min. ________________________________dB ______________________________________

Max. input power______________________________watt ______________________________________

Input_________Output_________Coupled_________

Operating Temperature:_____________ ° C

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________

Application

Space __________ Military __________ Industrial ______________ Commercial _________________

Description: ________________________________________________________________________

Parameters important for application: ___________________________________________________

FREQUENCY RANGE

Lo ____________________ RF ________________________ IF ___________________________

LEVEL MIXER: Dynamic range parameters (choose the most critical for your application)

a) _________dB over ____________MHz b) Flatness over frequency _______________ dB

c) Changes over temperature _____ dB over ___ ° C d) Unit-to-unit variation _______________ dB

LO-RF __________dB over ____________ MHz Impediance __________________________

LO-IF __________ dB over ____________ MHz LO port _______ RF port ______ IF port ______

RF-IF __________ dB over ____________ MHz

HARMONIC INTERMODULATION REQUIREMENTS

___________________ X LO by _____________________ X RF _______________dB below IF

REPLACEMENT FOR EXISTING MODEL

Manufacturer _________________________ Model _____________________

__________________________________________________________________________________

PINS TEMPERATURE RANGE

Hermetic seal required? ___Yes ___ No Operating ____________ Storage ______________

Small size important? ___ Yes ___ No MIL-SPEC _______ Group A ___ , B ___ , C ______

Max. size Requirement: L ___ " W ___ " H ___ " SCREENING REQUIRED

Configuration Test Conditions MIL-STD

Plug-in _____________ Flat pack __________ Vibration _________________________

Surface Mount _________________________ Shock _________________________

BNC ___ SMA ___ N ___ TNC ___ Burn-In ________________________________

Connector Orientation Other ___________________________________

Other _______________________________ Lot data _________________________________

Mounting Requirements _________________ Unit data ________________________________

thru hole ___ tapped hole ___ flange ___ Other __________________________________

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

Attenuation _____________db, Tol. ± ___________dB ______________________________________

Attenuation flatness max. ± _____________________dB ______________________________________

Over frequency ______________________________MHz ______________________________________

Max. input power______________________________watt ______________________________________

Input_________Output_________

Operating Temperature:_____________ ° C

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

RF Input power max. ______________dBm, min. _______dBm ___________________________

Max. Conversion loss _____________________dB ___________________________

Rejection of fundamental at output _____ dB min., relative to 2nd harmonic ____________________________

Rejection of 3rd harmonic at output _____ dB min., relative to 2nd harmonic ____________________________

Rejection of 4th harmonic at output _____ dB min., relative to 2nd harmonic ____________________________

VSWR or return loss (dB) __ 50 ohms __ 75 ohms __ other __________________________

Input ___________ Output _____________

Max. input (without damage) ______________dBm , Operating Temperature: ______________ ° C

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

Passband insertion loss_______________________dB max. _________________________________________

Stopband_____________dB min. at ______________MHz _________________________________________

_____________dB min. at ______________MHz

_____________dB min. at ______________MHz _________________________________________

_____________dB min. at ______________MHz

Passband VSWR______________________________max. _________________________________________

Impedance __50 ohms __75 ohms _______________Other

Power input_______________________________dBm max.

Group delay (passband)________________________ns max.

Group delay variation (for flat delay)

DC-fco___________________________________ns max.

DC-2fco__________________________________ns max.

Dc-2.67fco________________________________ns max.

Operating Temperature______________ ° C

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

Center or cutoff frequency: ___________________________

1dB or 3dB BW or cutoff ____________________________

VSWR ___________________________________________

Passband ____________ to ____________

I.L. @ Center Frequency of in Passband _________________________

Phase Linearity: ± __________________________________ degrees.

Rejection: _____________________ dB @ _____________________

Frequency Range: __________________________________________

Rejection: _____________________ dB @ _____________________

Phase Match: ± ____________________________________________

Rejection: _____________________ dB @ _____________________

Frequency Range: __________________________________________

Package Style: ____________________________________________

Package Dimensions: _______________________________________

Connectors: IN: _________________ OUT: ________________ Mounting (check one) ____Yes, ____No

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

Input power, min. ______________dBm, max. _______dBm ___________________________________

Power output _________________dBm, Tol. ± _____dB ____________________________________

Control current _______________________________ mA _____________________________________

Impedance ___ 50 ohms ___ 75 ohms ________________________________

Limiting: ____________________________

Input range _________________ to _____________dBm ____________________________________

Output amplitude change ______________________ dB max. ____________________________________

Output phase change _______________________deg. max. _____________________________________

Max. input (without damage) ______________dBm , Operating Temperature: ______________ ° C

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

Output port ___________________ MHz

LO power level ______________________________ dBm ____________________________________

RF power level ______________________________ dBm ____________________________________

Max DC output voltage required __________________ mV ____________________________________

Polarity (for 2 in-phase input signals), Pos.___ , Neg.____ ____________________________________

Max DC offset Voltage ____________ mV ___________________________________

Impediance _______________________________

RF/LO ___ 50 ohms ______ 75 ohms

Output ___ 500 ohms ______ 50 ohms ____ 75 ohms

For external output load

___ 500 ohms ___ 50 ohms ___75 ohms ___________ Other

Isolation, min. LO-RF __________________________ dB

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

No. of way ______________, ____ Splitter ____ Combiner ______________________________________

Phase: __0° __ 90° ___180° _________ ° ______________________________________

Phase unbalance __________________________ deg. max. ______________________________________

Amplitude Unbalance _______________________ dB max. _______________________________________

Isolation between parts ______________________ dB min. ________________________________________

VSWR or return loss (dB) __50 ohms __75 ohms _____Other Input ______________ Output ____________

Internnal load dissipation ___________________ watt

Max. power rating _________________________ watt

Operating Temperature: ______________ ° C

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

___ With driver, ___ Without driver

Frequency Range __________________________MHz Power input Max. __________________________dB

Insertion loss max. _________________________ dB Isolation (in-out) min. _______________________ dB

VSWR or return loss (dB) ___ 50 ohms ___ 75 ohms ___ other, input _____ output _____

Supply current (for driver) _____________ mA

Supply voltage (for driver) _____________ mA

Control voltage ____ Vmax. Current _____ mA

Logic: ___ TTL ___ CMOS ___ not applicable

Operating temperature ________________ ° C

*50% control to 90% RF (on) to 10% RF (off)

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________

If your particular requirements are not met with a PANATRON catalog item, please complete the check list below and mail, phone, or fax it to PANATRON, INC., Applications Engineering. Please type or print clearly.

Schematic: ____A ____B ____C ____D ____E ____F

Impediance: Primary_______ohms, Secondary_________ohms

VSWR or return loss (dB) Primary________ Secondary_________

Bandwidth:

1. dB___________________MHz to ___________________MHz

2. dB___________________MHz to___________________MHz

3. dB___________________MHz to___________________MHz

Phase unbalance______________dB

DC current through windings: Primary_____mA, Secondary____mA

Through center tap? Primary: Y N , Secondary: Y N

Insulation Resistance: Primary to secondary_______________ohms

Dielectric withstanding voltage_________V. _____DC ______AC

Operating Temperature:___________________ ° C

Coaxial Connector: ____BNC ____TNC ____SMA ____Type N ____Type F ___________________Other

________________________________________________________________________________________